Technical data and Ordering information
Technical data
| SCROLLVAC 3 plus | SCROLLVAC 3S plus | ||
| Max Pumping Speed (50Hz) | m³h⁻¹ | 3 | |
| Max Pumping Speed (60Hz) | m³h⁻¹ | 3.5 | |
| Ultimate pressure with closed gas ballast | mbar | 0.1 | |
| Ultimate pressure with gas ballast (1 turn) | mbar | 0.15 | |
| Gas Ballast flow rate (1 Turn) | slm | 2.5 | |
| Mains Voltage | V | 100 +/- 6% 1 phase 50/60 Hz | |
| 115 +/- 10% 1 phase 50/60 Hz | |||
| 200 +/- 10% 1 phase 50/60 Hz | |||
| 230 +/- 10% 1 phase 50/60 Hz | |||
| Power Consumption at Ultimate | W | 180 | 210 |
| Mains Connector | IEC EN60320 C13 | ||
| Noise level | dB(A) | 54 | |
| Inlet flange | DN 16 ISO-KF | ||
| Exhaust connection | 1/8 inch BSP for 6×8 mm hose | 1/8 inch BSP for 6×8 mm hose Exhaust filter supplied | |
| Weight | kg | 7.8 | 8 |
| Dimensions (W x H x D) | mm | 158 x 231 x 224 | |
Ordering information
Pumps
| Part number | Description |
| Standard version | |
| 142030V330 | SCROLLVAC 3 plus 230V 1ph 50/60Hz |
| 142030V320 | SCROLLVAC 3 plus 200V 1ph 50/60Hz |
| 142030V310 | SCROLLVAC 3 plus 115V 1ph 50/60Hz |
| 142030V300 | SCROLLVAC 3 plus 100V 1ph 50/60Hz |
| Scientific version | |
| 142030V430 | SCROLLVAC 3S plus 230V 1ph 50/60Hz |
| 142030V420 | SCROLLVAC 3S plus 200V 1ph 50/60Hz |
| 142030V410 | SCROLLVAC 3S plus 115V 1ph 50/60Hz |
| 142030V400 | SCROLLVAC 3S plus 100V 1ph 50/60Hz |
Spares
| Part number | Description |
| GK7440001 | Tip Seal Kit |
| GK7440002 | Bearing replacement Kit |
| GK7440003 | Gas ballast and Exhaust kit |
| GK7440004 | Inlet KF16 adaptor Kit |
Accessories
| Part number | Description |
| 142030V450 | Inlet Valve 100 – 120V |
| 142030V451 | Inlet Valve 200 – 240V |
| 142030V452 | Delay Relay |
| 142030V455 | Gas ballast or Exhaust push-in fitting 1/8 inch BSP |
| 142030V456 | Gas ballast fine restrictor |
| 142030V457 | Inlet Push-in fitting 1/4 inch BSP |
| 142030V458 | Inlet 1/4 inch BSP adaptor |
| 142030V459 | SCROLLVAC 3 plus Base mounting plate |
| 142030V460 | Bracket |
| 142030V461 | Exhaust Silencer / gas ballast filter 1/8 inch BSP |
| 142030V462 | Vibration Isolator Kit |
| 142030V466 | Adhesive rubber pads (pack of 4) |
| 140125T | Inlet Filter DN25 ISO KF |
| 800102V0003 | Lead Assembly, 10 Amax, C13, UK |
| 800102V0002 | Lead Assembly, 10 Amax, C13, Europe |
| 800102V1002 | Lead Assembly, 10 Amax, C13, USA |
